As suggested by FAWG, Ill post my progress if there seems to be interest.
I bought the KIT#2 with engine mount, exhaust and prop from kit3.
Below is the kit as recieved, all nicely packed.
First step was making a building table out of the box top - just fitted into the garage...
Next I made or procured the basic tools.
The wing structure builds fast, longest time is spent cleaning the parts and straightening the edges to 90Degs.
Building the Flapperons
Using straps and some wood to pull the skin over the slats
Again using straps to pull the skin on the Horz Stab
Fin and rudder complete less the plastic tips..
Here I use a little block of wood to 'pull' the plastic tip into the end of the flapperon.
A wooden profile to line up end covers on the Horz Stab
Completed Horz Tail, just the centre bracket to go..
At this stage slats, flaperons, Horz stab, elevator, fin and rudder are complete. next is to cover the wings.
Ok so tell me guys, should I continue to post ? Standard build pictures are available elsewhere on the net so I thought I should focus on school fees etc.. any comments ?
Cheers Ian
). What experience have you had in building aircraft and what tools does one need. Have you had any difficult phases.
. 
but I suppose he has an excuse .. he built something else first.. see below !
