Jis boeta, maak jy errouplynse bymekaar of wat? :shock: :shock: :lol: Ek weet van n 503 enjin met min ure wat jy goedkoop kan optel. Haha! Ja, dit lyk dan nou so... of hoe?! :lol: Ek wil nog nie aan 'n enjin dink nie, dis nog te ver in die toekoms, maar miskien n 912. (...as een dalk oor my pad kom...

Hi guys, I just bought this project from Go Vert and will complete the project and hopefully have lots of fun flying her! It will just be a while before I can get started, as I am out of the country at the moment and will only be back during August. I will post some updates as the project progresses...

Dankie Boet! Maar jy praat dan van die autolube... ek praat van die rotary disk se olie sisteempie... Die klein botteltjie wat met die cable tie aan die enjin vas is...

Pinch the pipe closed with a vise-grip and remove the worm clamp from the bottom most fitting. Pull the pipe off from the fitting. Put the end of the pipe into a suitable container, remove the cap from the filler bottle bottle and release the vise-grip. Go and have a cup of tea.................how ...

Hi Justin, I removed my VW engine from my Raven after engine failure. (detonation) So, if you want to rebuild your engine and need spares (casings, baffles, etc) then mine is available as I won't follow the VW route again... I am currently installing a low hour 582 engine, as the performance figures...

I had a 582 Blue Top and flying it with 165 jets at the coast with EGTs spot on. We have only 95 available at the coast and Rotax recommends unleaded, so I won't opt for LRP... I would say that the jet size must be determined by the EGT temp. If too low, downsize the jet, otherwise you only burn unn...

Boet wrote:Induna is a go-getter, finishes what he starts. Will make a good AP. Gaan daarvoor vriend!

Dankie Boet! Ek leer mos by die bestes...! Jul hulp word baie waardeer!

J

Hi KFA,

thanks for the info. It sounds like a mouth full, but so be it.

I am in the process of building my own aircraft and more will follow soon. Does a person's technical qualification/s also play a role?

J

Good day,

I am fairly new to the aviation community and would like to know how the process works for becoming an AP.

* What are the requirements?
* Any specific courses and exams?
* Who are the relevant contact person/s that I should speak to?

I appreciate your input.

Regards

Jacques

In what diameters can one getthe NC props? Do they manufacture RH tractor props as well?