Please phone Dirk if you have one available.

0837307680

Probeer MRF9382-T1. Dit is n Mosfet transistor, miskien kan Mantech of Electrocomp jou help. Die agent vir Freescale komponente is Avnet Kopp in SA, maar hulle verkoop gewoonlik in groter maat.

Hi there

Google airbus e plane please, cant get to post here.

Charles

To solder tinsel wire, take one strand of any multistrand cable, wind onto the tinsel wire and solder.This makes a nice end to solder to another part or component. Hope this help someone.

dankie

Hi Oupa-G

May I ask your ignition curve for the R 1200. I am currently on 25deg BTDC with both ignitions firing the same time.( Too afraid to go more for now)

Charles

Sorry for the hijack but you might like this photos. I bought a transponder on e-bay, hope it works, that will be the last of the interior work. Will start with the fine tuning of the engine shortly.

Please put me up for one, hope I am not to late.

Zodiac CH650 elevator trim

Holding force can be set with te grubscrews. Will test later. 250:1 geared motor from RS Components rest my own design and making all for under R200

Hi All

Please feel free to use this or modify it for your needs. No need for limit switches because the ball jumps on the extreme ends. Weight 164 grams, travel 18 mm in 10 seconds on 12V, did not measure the force but feels very strong.

I made this from scrap, simply clamp over rivethead and drill perfect holes.

herewith

Ystervark7 In the photos of your built process it seems like you are not using a vacuum line on your fuel pressure regulator. All I wanted to point out was that I use the simple way by putting a vacuum line on the pressure regulator. As far as I understand it this is very important because if you su...

Hi Oupa Nice work. Maybe you can use this. Installed the black/brown vacuum delay valve on the fuel pressure regulator and the MAP sensor, this sorts out the vacuum pulses at the short intakes and works fine for me. The tip of the injector is subjected to vacuum which will suck more fuel through it ...